Resistor Color Code Calculator
Decode or build 4, 5 and 6-band resistor colour codes and SMD codes (103, 1002, 4R7, EIA-96 01C). Shows tolerance, tempco and the nearest E6–E96 value.
Still loading. If the tool doesn’t appear, reload this page.
Planned features and workflows
Upcoming additions related to this tool. Open a plan to see its scope. These features are coming soon.
- AltF Blueprint Studio
Coming soon
About this tool
Resistor Color Code Calculator
Decode or build 4, 5 and 6-band resistor colour codes and SMD codes (3-digit, 4-digit, EIA-96), with tolerance, tempco and the nearest E-series value.
A resistor colour code calculator turns painted bands into ohms using IEC 60062: the first two bands (three on 5- and 6-band parts) are digits, the next is a power-of-ten multiplier, then tolerance and, on 6-band parts, temperature coefficient. Yellow, violet, red, gold is 47 × 100 = 4.7 kΩ ±5 %.
How to use Resistor Color Code Calculator
- 1
Pick 4, 5 or 6 bands, then choose each band's colour from left to right, starting at the end furthest from the tolerance band (gold or silver on most 4-band parts, often brown on 1 % parts).
- 2
Read the resistance, its tolerance range and, for 6 bands, the temperature coefficient; the E-series panel says whether the value is standard and shows the nearest E6 to E96 values.
- 3
To go the other way, switch to Value to colours and type a value such as 4.7k, or open the SMD code tab and type the code printed on a chip resistor such as 472, 4702, 4R7 or 01C.
Why use Resistor Color Code Calculator
4, 5 and 6 bands both ways
Decode colours into ohms, or type a value and get the bands to look for.
SMD codes on the same page
3-digit, 4-digit, R-notation and EIA-96 codes, including the ambiguous ones.
Colour is never the only cue
Every band is drawn with its colour name, so the preview works in either theme and for colour-blind readers.
Resistor colour code chart (IEC 60062)
| Colour | Digit | Multiplier | Tolerance (letter) | Temp. coefficient |
|---|---|---|---|---|
| Black | 0 | ×1 | — | 250 ppm/K |
| Brown | 1 | ×10 | ±1 % (F) | 100 ppm/K |
| Red | 2 | ×100 | ±2 % (G) | 50 ppm/K |
| Orange | 3 | ×1 k | ±0.05 % (W) | 15 ppm/K |
| Yellow | 4 | ×10 k | ±0.02 % (P) | 25 ppm/K |
| Green | 5 | ×100 k | ±0.5 % (D) | 20 ppm/K |
| Blue | 6 | ×1 M | ±0.25 % (C) | 10 ppm/K |
| Violet | 7 | ×10 M | ±0.1 % (B) | 5 ppm/K |
| Grey | 8 | ×100 M | ±0.01 % (L) | 1 ppm/K |
| White | 9 | ×1 G | — | — |
| Gold | — | ×0.1 | ±5 % (J) | — |
| Silver | — | ×0.01 | ±10 % (K) | — |
| Pink | — | ×0.001 | — | — |
No tolerance band at all means ±20 % (letter M). Pink (×0.001) is defined in IEC 60062 for very low values.
Common use cases
- Identify a loose through-hole resistor from a parts drawer before soldering it.
- Check that a 1 % metal-film resistor's five bands match the value on the bill of materials.
- Read a chip resistor marked 01C or 68X and confirm it is 10 kΩ or 49.9 Ω.
- Find the closest E12 or E24 value to a resistance worked out on paper.
Frequently asked questions
How do you read a resistor colour code?
Hold the resistor with the tolerance band on the right — gold or silver on most 4-band parts, often brown on 1 % parts, and usually set slightly apart — and read left to right. On a 4-band resistor the first two bands are digits and the third is the multiplier, so yellow, violet, red, gold is 47 × 100 = 4,700 Ω with ±5 % tolerance.
What is the difference between 4-band, 5-band and 6-band resistors?
A 4-band resistor has two significant digits, a 5-band one has three, and a 6-band one adds a temperature-coefficient band after the tolerance. Three digits let 1 % parts show E96 values such as 4.99 kΩ (yellow, white, white, brown, brown).
What do gold and silver mean on a resistor?
In the tolerance position gold means ±5 % and silver ±10 %. In the multiplier position gold means ×0.1 and silver ×0.01, so green, blue, gold, gold is 56 × 0.1 = 5.6 Ω ±5 %.
How do I read an SMD resistor code like 103, 1002, 4R7 or 01C?
103 is 10 followed by three zeros, so 10 kΩ; a 4-digit code such as 1002 works the same way with three digits (100 × 10² = 10 kΩ). R marks the decimal point, so 4R7 is 4.7 Ω. A two-digit number plus a letter is EIA-96: 01 is the first E96 value (100) and C means ×100, so 01C is 10 kΩ.
What does the sixth band on a resistor mean?
It is the temperature coefficient: how much the resistance drifts per kelvin, in parts per million. Black is 250 ppm/K, brown 100, red 50, yellow 25, green 20, orange 15, blue 10, violet 5 and grey 1.
What are E12, E24 and E96 resistor values?
They are the IEC 60063 preferred-number series: 12, 24 or 96 values per decade, matched to ±10 %, ±5 % and ±1 % tolerance. E12 runs 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82, so a 5 kΩ design usually becomes 4.7 kΩ or 5.6 kΩ.
Embed this tool on your site
Add the Resistor Color Code Calculator widget to your blog or website — free, responsive, no signup. Just keep the “Widget by AltFTool” credit link visible.
<iframe src="https://www.altftool.com/embed/widget/resistor-color-code-calculator"
title="Resistor Color Code Calculator — free AltFTool widget"
width="100%" height="640" style="border:0;border-radius:12px;overflow:hidden"
loading="lazy" referrerpolicy="no-referrer-when-downgrade" allow="clipboard-write"></iframe>
<p style="font-size:12px;margin:4px 0 0">Widget by <a href="https://www.altftool.com/tools/all/resistor-color-code-calculator?utm_source=embed&utm_medium=widget" rel="nofollow">AltFTool — free online tools</a></p>