Skip to main content
Preparing workspace

Pupillary Distance (PD) Meter

Measure your pupillary distance (PD) online with your camera and a bank card for scale. Repeated captures, median and spread. Nothing is uploaded.

Still loading. If the tool doesn’t appear, reload this page.

About this tool

Pupillary Distance (PD) Measurement Online

Measure your pupillary distance (PD) with your camera and a bank card for scale: on-device face landmarks find your pupils, repeated captures give the median and spread, and you can fine-tune every marker. Not a substitute for an optician.

Pupillary distance (PD) is the distance in millimetres between the centres of your pupils, used to centre the lenses of glasses. This tool measures it with your camera: a bank card held under your nose is 85.60 mm wide, which turns pixels into millimetres. It is a home estimate, not a substitute for an optician.

How to use Pupillary Distance (PD) Meter

  1. 1

    Remove your glasses and sit in even light with the camera at eye height, about an arm's length away.

  2. 2

    Press Start camera and allow access (or choose Use a photo instead if you already have a photo with a card).

  3. 3

    Hold a bank or ID card flat under your nose, long side horizontal, look straight into the lens and press Capture.

  4. 4

    Check the markers: drag them, or select one and use the arrow keys, so the pupil markers sit on the pupil centres and the card markers on the card's edges, then Add to results.

  5. 5

    Repeat for at least three captures and read the median PD, its range and the single-eye values.

Why use Pupillary Distance (PD) Meter

  • Card for scale

    Bank, credit and debit cards and most ID cards and driving licences are 85.60 mm wide (ISO/IEC 7810 ID-1), so the card in the photo gives a millimetre scale without any screen calibration. On-device face landmarks place the markers; you check them.

  • Repeated captures, honest spread

    Take three or more captures; the result is their median with the range and standard deviation, and captures far from the rest are flagged so you can re-check them.

  • Corrections shown, not hidden

    The tool corrects for the card sitting in front of your eyes (perspective) and for your eyes turning in to look at the camera (convergence), and shows the assumptions so you can change them.

  • Private and on-device

    Face landmarks are found by a model that runs in your browser from this site. The camera feed and photos never leave your device and are not saved.

Common use cases

  • Ordering glasses online when your prescription does not include your PD.
  • Double-checking a PD you were given, or measuring single-eye (monocular) PD for each side.
  • Getting a quick estimate at home when you cannot get to an optician, before confirming it at your next eye test.

Frequently asked questions

How can I measure my pupillary distance at home?

Hold a standard bank card under your nose, look into your phone or laptop camera and take a photo; the card's 85.60 mm width gives the scale, and the distance between your pupil centres in the photo becomes your PD in millimetres. Take several captures and use the median. A mirror and a millimetre ruler also work, but are harder to read accurately.

What is a normal PD?

Most adults have a PD between about 50 and 75 mm, with an average around 63 mm (Dodgson, 2004, from a large anthropometric survey); a range of 45 to 80 mm covers practically all adults. Children's PDs are smaller. There is no 'correct' PD — lenses must be centred on your own pupils.

How accurate is an online PD measurement?

When three or more captures agree within about 1.5 mm, the median is usually a reasonable estimate; the tool shows that spread so you can judge. Errors come from a tilted or curved card, the card being nearer the camera than your eyes, looking away from the lens, and marker placement. Glasses for high prescriptions or varifocals need an optician's measurement.

What is the difference between distance PD and near PD?

Distance PD is measured with the eyes looking far away and is used for distance and most everyday glasses. When you look at something close, your eyes turn inward, so near PD — used for reading glasses — is usually a few millimetres smaller. This tool converts the camera measurement to an estimated distance PD and also shows the PD at your camera distance.

What is single (monocular) PD?

Monocular PD is the distance from the centre of your nose bridge to each pupil, written as two numbers such as 31.5/32.5. Faces are rarely perfectly symmetrical, so it matters for varifocals and stronger prescriptions. The tool estimates it from a nose-bridge marker; its automatic position is approximate, so check it before relying on single-eye values.

Why do I need a credit card to measure PD?

A photo has no built-in scale, so the tool needs something of known size in the same picture. Bank, credit and debit cards, and most ID cards and driving licences, share the ISO/IEC 7810 ID-1 size of 85.60 × 53.98 mm. Any side works; you can cover the numbers — only the card's edges are used.

Is my photo uploaded?

No. The camera image is processed in your browser, the face model is loaded from this site and runs on your device, and captures are kept in memory only until you close the page. Nothing is uploaded, stored or shared.

Can I use this PD to order glasses?

Many online retailers accept a self-measured PD, and a median from several consistent captures is a reasonable estimate for single-vision glasses. It is not a substitute for an optician: for varifocals, high prescriptions, children's glasses, or if your new glasses feel uncomfortable, have your PD measured professionally.