Image DPI Converter
Change a JPG or PNG from 72 to 300 or 200 DPI without touching a pixel, or resize to a print size in cm or inches. Runs in your browser; no upload.
Still loading. If the tool doesn’t appear, reload this page.
About this tool
Change Image DPI to 300, 200 or Any Value
Change a JPEG or PNG's DPI to 200, 300 or any value without touching its pixels, or resize it to a print size in cm or inches at that DPI.
To change an image's DPI without losing quality, rewrite only the resolution field stored in the file and leave the pixels alone. This tool does that in your browser: for a JPEG it sets the JFIF density (ITU-T T.871) where the file allows it and the Exif XResolution and YResolution tags (CIPA DC-008) when present, using Exif alone for RGB-coded and CMYK JPEGs; for a PNG it writes a pHYs chunk with a fresh CRC-32, as the W3C PNG specification defines. The compressed image data is copied byte for byte. If you need a set print size instead, it resamples to pixels = inches × DPI, so 4 × 6 inches at 300 DPI becomes 1200 × 1800 px. The DPI shown afterwards is read back from the saved file.
How to use Image DPI Converter
- 1
Choose a JPEG, PNG or WebP file under JPEG, PNG or WebP file; the panel shows its format, pixel size, the DPI the file declares and the size it prints at
- 2
Pick Change the DPI only to keep every pixel, or Resize to a print size to make an exact width and height at that DPI
- 3
Type the Target DPI or tap a preset such as 200 or 300, or press a Use button in the exam list to copy that notice's DPI (and its print size when the notice gives no pixel size)
- 4
For a print size, enter Print width and optionally Print height in cm, mm or inches, then choose whether to crop the centre or stretch when the shape differs
- 5
Press Set DPI (or Resize and set DPI), compare the Before and After rows read back from the new file, and use the Download button to save it
Why use Image DPI Converter
Pixels left untouched
In DPI-only mode the JPEG scan data or PNG IDAT chunks are copied unchanged, so there is zero quality loss.
Read back, not assumed
After writing, the tool parses the new file again and shows the JFIF, Exif or pHYs values it actually contains.
Print-size resampling
Enter a width and height in cm, mm or inches; the tool works out the pixels at your DPI and crops or stretches to fit.
Stays on your device
The file is read and rewritten in the browser. Nothing is uploaded.
Pixels needed for common print sizes
| Print size | 150 DPI | 200 DPI | 300 DPI |
|---|---|---|---|
| 35 × 45 mm photo (UK/EU passport size) | 207 × 266 | 276 × 354 | 413 × 531 |
| 6 × 2 cm signature box | 354 × 118 | 472 × 157 | 709 × 236 |
| 10 × 5 cm declaration | 591 × 295 | 787 × 394 | 1181 × 591 |
| 4 × 6 in print | 600 × 900 | 800 × 1200 | 1200 × 1800 |
| 5 × 7 in print | 750 × 1050 | 1000 × 1400 | 1500 × 2100 |
| A4 page (210 × 297 mm) | 1240 × 1754 | 1654 × 2339 | 2480 × 3508 |
When an exam notice states both a pixel size and a DPI, the pixel size is what the upload form checks.
Exam photo and signature rules
Common use cases
- An applicant whose exam notice asks for a signature or thumb impression scanned at 200 or 300 DPI, and whose phone photo says 72 DPI
- A print shop that rejects a 72 DPI file although it has plenty of pixels for the print size
- Preparing a photo to print at an exact size, such as 4 × 6 inches or a 3.5 × 4.5 cm photo, at 300 DPI
- Checking what DPI a JPEG or PNG really declares before sending it to a printer or a form
Frequently asked questions
How do I change an image from 72 DPI to 300 DPI without losing quality?
Change only the DPI field and keep the pixels. Choose the image, leave the mode on Change the DPI only, enter 300 and save. The JPEG or PNG image data is copied unchanged, so quality is identical. The image then prints smaller, at pixels ÷ 300 inches.
Does changing DPI change the image quality or file size?
No. DPI is a number stored in the file's header. Changing it alone leaves every pixel as it was and changes the file size by a few dozen bytes, at most a few hundred. Quality changes only when the image is resampled to a different pixel size.
How many pixels do I need to print at 300 DPI?
Multiply the print size in inches by 300. A 4 × 6 inch print needs 1200 × 1800 pixels, and an A4 page needs 2480 × 3508. For centimetres, divide by 2.54 first: 6 cm at 300 DPI is 6 ÷ 2.54 × 300 ≈ 709 pixels.
Where is DPI stored in a JPEG and a PNG?
A JPEG stores it in the JFIF APP0 header as a density value with a unit, and often again in Exif as XResolution and YResolution. A PNG stores it in a pHYs chunk as pixels per metre. 300 DPI is 11,811 pixels per metre. This tool writes all of these fields that apply. It does not rewrite Photoshop (APP13) or XMP resolution entries; an editor that reads those may still show the old value.
Why does my image still show 72 or 96 DPI after I changed it elsewhere?
Usually another program re-saved the file without the field, and viewers then show their default of 72 or 96. Some programs also read Exif before JFIF, so a file whose two fields disagree can show different values in different apps. This tool sets both and shows the values read back from the saved file. It does not rewrite Photoshop (APP13) or XMP resolution entries, so an editor that reads those first may still show the old value.
Can I set the DPI of a WebP image?
WebP has no DPI field of its own, so this tool re-encodes a WebP as JPEG by default, or as PNG (lossless) if you choose it under Save as, and writes the DPI there. PNG avoids any further quality loss but is usually larger.
Which exams ask for a DPI?
Among the notices summarised on our exam photo pages, SSC GD Constable asks for the signature at 300 DPI; IBPS PO and Clerk and SBI PO and Clerk ask for the left thumb impression and handwritten declaration at 200 DPI; and RRB NTPC and RRB Group D set a 100 DPI minimum for the signature (and, for Group D, the photo). Always check the current notice, because the pixel and KB limits are what the upload form checks.
Embed this tool on your site
Add the Image DPI Converter widget to your blog or website — free, responsive, no signup. Just keep the “Widget by AltFTool” credit link visible.
<iframe src="https://www.altftool.com/embed/widget/image-dpi-converter"
title="Image DPI Converter — free AltFTool widget"
width="100%" height="640" style="border:0;border-radius:12px;overflow:hidden"
loading="lazy" referrerpolicy="no-referrer-when-downgrade" allow="clipboard-write"></iframe>
<p style="font-size:12px;margin:4px 0 0">Widget by <a href="https://www.altftool.com/tools/all/image-dpi-converter?utm_source=embed&utm_medium=widget" rel="nofollow">AltFTool — free online tools</a></p>