Racked storage
Each pallet sits in its own position in a rack, several levels high, so any pallet can be reached without moving others. It suits many SKUs that move often.
Pallet storage, planned
Estimate a monthly storage bill from a warehouse's own rates, find out whether racked, floor or overflow space suits your goods, and build pallets that get through receiving without rework.
Storage types
Warehouses offer a few kinds of pallet space. The right one depends on how many products you store, how often they move and how sturdy the loads are.
Each pallet sits in its own position in a rack, several levels high, so any pallet can be reached without moving others. It suits many SKUs that move often.
Pallets stand on the warehouse floor, often stacked when the loads can bear it. It suits large quantities of one sturdy product that moves slowly.
Extra space for weeks or months to cover a busy season, a large inbound order or a move. Minimum stays and handling fees matter most here.
Temperature- or humidity-controlled areas for goods that heat, cold or damp could spoil, such as some foods, cosmetics or electronics. It usually costs more.
Storage quiz
Four questions about time, products, loads and movement. The result suggests a storage type to read about and to ask warehouses for.
Storage calculator
Enter how many pallets you store, the warehouse's monthly rate per pallet, and how many pallets move in or out in a month. The calculator adds storage and handling.
Use the warehouse's own figure; this example is only a placeholder.
Count each pallet received and each pallet shipped. If one fee covers in and out, count each pallet once.
Your month
Arithmetic from the counts and rates you enter, not a quote or a price. Minimum charges, account fees, labeling and other extra services are not part of this sum.
Cost drivers
Two warehouses can quote very different totals for the same pallets. These are the usual reasons.
More pallets and longer stays raise the bill, though some warehouses lower the rate for larger or longer commitments.
Oversized or extra-tall pallets can take two positions or carry a surcharge. Racks are usually laid out for standard 48 by 40 inch pallets.
Each pallet received or shipped brings a handling fee, so fast-moving stock can cost more in handling than in storage.
Climate control, food-grade areas and space for hazardous materials cost more than standard dry storage.
Space near ports and big cities tends to cost more than space farther out, though trucking to and from it may cost less.
Minimum charges, account fees, labeling, inventory counts and pallet rework all add to the base storage rate.
These are common cost drivers, not anyone's price list. Ask each warehouse for its full rate sheet and terms in writing.
Pallet prep
Warehouses can refuse or rework pallets that are unsafe or unlabeled, often for a fee. Tick each item as you build the load, then print or reset the list.
0 of 12 done
Every warehouse sets its own pallet size, height and weight rules. Ask for them in writing and check them before the truck is loaded.
Questions to ask
The same questions to every warehouse make their rate sheets comparable.
FAQ
Pallet storage is usually priced as a monthly rate per pallet or per pallet position, plus handling fees when pallets come in and go out. Some warehouses bill by the square foot instead, and many add minimums or account fees. Put each warehouse's own figures into the PalletPier calculator to compare offers on the same basis.
The most common pallet in the US measures 48 by 40 inches, and racks and trailers are usually planned around it. Warehouses also set a maximum height and weight for each pallet, so check those limits before you build loads, especially for tall or heavy goods.
Handling in and out fees pay for the labor and equipment to unload, check in and put away a pallet, and later to pick it and load it onto a truck. Some warehouses charge one fee at receiving that covers both directions; others charge each way. Ask which applies before comparing rates.
Racked storage puts each pallet in its own rack position, so any pallet can be reached directly. Floor storage keeps pallets on the floor, often stacked, which suits large quantities of one sturdy product. The warehouse decides what fits, based on your pallets' size, weight and stability.
Responsibility for damaged goods in storage depends on the storage agreement. Warehouses often limit their liability, for example to an amount per pound or per item, and exclude some causes. Read the terms, ask about the limit, and talk to your own insurance agent or broker about coverage for goods in storage.
No. PalletPier Warehousing is a design demonstration by AltFTool, so its quote and booking buttons are placeholders that send nothing, and no warehouse receives your details. Use the storage calculator and pallet checklist here, then contact warehouses you choose.
From AltFTool
PalletPier is a demo, so it keeps no mailing list. The sign-up box below is for AltFTool's own email list, and its consent box shows exactly what that covers.
Put each warehouse's rates into the storage calculator with the same pallet counts, and build your first loads with the prep checklist.
About these demos
AltFTool's Shipping & Logistics demos are landing-page designs for moving goods, all with fictional brands: CargoLoom for freight quotes, SwiftSatchel for local courier runs, ShelfRunner for e-commerce fulfillment, BorderLedger for customs brokerage, BoxBeacon for parcel shipping and PalletPier for pallet storage.
Calculators on these pages work out freight density, dimensional weight, storage and fulfillment costs from the measurements and rates you enter. None of these brands moves, stores or clears goods, quote buttons are disabled, and customs and carrier rules should be confirmed with the carrier or authority concerned.
CargoLoom, BoxBeacon, SwiftSatchel, ShelfRunner, BorderLedger and PalletPier are fictional brands made for AltFTool's logistics page designs. None of them carries freight, handles parcels, stores pallets or files customs entries, and AltFTool offers none of these services, so quote requests on these pages reach nobody.
The BoxBeacon demo on AltFTool multiplies a box's length, width and height in inches, divides by the divisor you choose and compares the result with the actual weight, because carriers usually bill the higher of the two. Divisors differ between carriers and services, so check your carrier's current rules.
No part of AltFTool's BorderLedger customs demo can classify goods or work out duty. Duty depends on the tariff classification, origin and value of the goods and on the rules in force, so confirm it with U.S. Customs and Border Protection or a customs broker before you ship.
Measurements and rates typed into AltFTool's shipping calculators are worked out in your browser and are not stored or sent. Only an email address entered in a sign-up box is saved, by AltFTool, which sends one email to confirm it, and every message has an unsubscribe link.