Skip to main content

Skip to content

Parcel shipping, measured

Check a parcel's billable weight before you buy the label

Work out dimensional weight from your box size, see which weight a carrier would bill, pick between a poly mailer, padded mailer and box, and pack each parcel so it reaches the customer in one piece.

  • A billable weight calculator with two common divisors
  • A short quiz to pick your packaging
  • Packing tips that keep parcels small and safe

Billable weight

Work out dimensional and billable weight

Carriers bill the greater of a parcel's actual weight and its dimensional weight. Enter the packed size and weight, then pick the divisor from your carrier's rate guide.

Measure the sealed package, bulges and all. Carriers have their own rules for fractions of an inch.

Your carrier's rate guide says which divisor applies. Some carriers use dimensional weight only above a size threshold.

This parcel

Package size2,160 cu in
Dimensional weight16 lb
Actual weight, rounded up9 lb
Billable weight16 lb

Arithmetic from the size and weight you enter, rounded up to the next whole pound. It is not a rate or a price; your carrier's own rounding rules, divisor and size thresholds decide the weight it bills.

Service levels

The main kinds of parcel service

Most US parcel services fall into a few groups. Transit times are counted in business days and vary by carrier, distance and season.

Ground

Truck-based service for most parcels. Transit often runs one to five business days across the contiguous US, depending on distance.

  • Most parcels
  • Distance-based

Express

Air services sold by the number of business days, such as next day or two day. They cost more and often have earlier cut-off times.

  • Set business days
  • Earlier cut-offs

Regional carriers

Carriers that serve one part of the country and can be good value inside it. Coverage ends at their region's edge, so check both addresses.

  • One region
  • Check coverage

Postal services

USPS parcel services suit light packages and reach PO boxes and military addresses, which private carriers generally cannot.

  • Light parcels
  • PO boxes

Packaging quiz

Poly mailer, padded mailer or box?

Four quick questions about what you ship. The result suggests a packaging type to read about; check it against your own products.

1. What are you shipping?
2. Could the item break, bend or crush?
3. How heavy is the packed item?
4. How much does the unboxing matter to your brand?

Packaging side by side

How the three packaging types compare

Packaging changes both the protection and the size a carrier measures, so it affects cost as well as safety.

What to weighPoly mailerPadded mailerCorrugated box
SuitsClothing and soft goodsSmall, flat itemsFragile, heavy or rigid items
Crush protectionVery littleSomeThe most, with cushioning
Weight it addsVery lightLightThe heaviest of the three
Effect on DIM weightSmall; it shapes to the itemSmall to moderateLarge if the box is oversized
Water resistanceGoodVaries by materialLow; wrap items that must stay dry
BrandingPrinted mailersPrinted mailersPrinted boxes, tissue and inserts

Scroll the table sideways to see every column.

Carriers set their own rules and charges for soft, oversized or oddly shaped packages. Check your carrier's service guide before you choose.

Packing tips

Pack parcels that stay small and hold up

Good packing keeps the billable weight down and the contents in one piece.

  1. Measure the sealed package

    Measure length, width and height at the longest points after sealing, since bulges and handles count.

  2. Right-size the box

    Every extra inch on each side adds cubic inches, which can push the dimensional weight past the actual weight.

  3. Cushion every side

    Leave about two inches of cushioning between the item and each side of the box, and fill gaps so nothing shifts.

  4. Tape in an H pattern

    Tape the center seam and both edge seams, top and bottom, with pressure-sensitive packing tape about two inches wide.

  5. One clear label

    Put a single label on the largest flat surface, away from seams, and remove or cover old labels and barcodes.

  6. Add an inside copy

    Slip a card with both addresses inside the package, in case the outer label is torn or smudged.

  7. Give it a gentle shake

    If you hear or feel the contents move, open the package and add more fill before you seal it again.

Questions to ask

Questions to ask a carrier or shipping platform

These answers decide what a parcel really costs, beyond the base rate.

  • Which dimensional weight divisor applies to my account, and from what package size?
  • How do you round fractions of an inch and of a pound?
  • What extra charges apply to residential addresses, large packages or remote areas?
  • What are the weight and size limits per package for this service?
  • What is the liability limit per package, and how do I declare a higher value?
  • What happens if you measure a package as larger than the size on the label?
  • What are the daily drop-off and pickup cut-off times?

FAQ

Common questions about parcel shipping costs

What is dimensional weight?

Dimensional weight, or DIM weight, estimates a parcel's weight from its size: length times width times height in inches, divided by a divisor the carrier sets. Carriers bill whichever is greater, the actual weight or the dimensional weight, so a large, light box can cost as much as a small, heavy one.

Which DIM divisor should I use?

Use the DIM divisor in your own carrier's current rate guide or account terms. In the US, 139 is common for daily or account rates at large parcel carriers, and 166 appears in some retail and postal pricing. Divisors and the size where DIM pricing starts can change, so check before relying on a number.

How do I measure a package correctly?

Measure the package after it is sealed, at its longest points: length is the longest side, then width and height. Count bulges and handles. Carriers have their own rules for fractions of an inch, and rounding can add a pound or more to the billable weight, so check your carrier's rule.

Is a poly mailer or a box better for clothing?

For folded clothing and other soft goods, a poly mailer is usually enough: it is light, water-resistant and adds little size. A box makes sense when items could crush, such as shoes sold in their own box, or when presentation matters for a gift or a premium order.

Why can a carrier bill more than the label price?

A carrier may bill more than the label price after remeasuring a package and finding it larger or heavier, or for a residential surcharge, an address correction or extra handling for heavy or oddly shaped parcels. Ask the carrier for the adjustment details, and measure every parcel after it is sealed.

Can BoxBeacon buy shipping labels for me?

No. BoxBeacon Parcel Shipping is a design demonstration by AltFTool, so its rate and label buttons are placeholders that send nothing, and no carrier receives your details. Use the billable weight calculator and packaging quiz here, then buy labels from a carrier or platform you choose.

Measured your box?

Run the packed size through the billable weight calculator, then try a smaller box or a mailer and compare the result.

About these demos

Shipping and logistics page designs with fictional brands

AltFTool's Shipping & Logistics demos are landing-page designs for moving goods, all with fictional brands: CargoLoom for freight quotes, SwiftSatchel for local courier runs, ShelfRunner for e-commerce fulfillment, BorderLedger for customs brokerage, BoxBeacon for parcel shipping and PalletPier for pallet storage.

Calculators on these pages work out freight density, dimensional weight, storage and fulfillment costs from the measurements and rates you enter. None of these brands moves, stores or clears goods, quote buttons are disabled, and customs and carrier rules should be confirmed with the carrier or authority concerned.

Frequently asked questions

Are CargoLoom, BoxBeacon and the other AltFTool logistics brands real carriers?

CargoLoom, BoxBeacon, SwiftSatchel, ShelfRunner, BorderLedger and PalletPier are fictional brands made for AltFTool's logistics page designs. None of them carries freight, handles parcels, stores pallets or files customs entries, and AltFTool offers none of these services, so quote requests on these pages reach nobody.

How is dimensional weight worked out on AltFTool's BoxBeacon demo?

The BoxBeacon demo on AltFTool multiplies a box's length, width and height in inches, divides by the divisor you choose and compares the result with the actual weight, because carriers usually bill the higher of the two. Divisors differ between carriers and services, so check your carrier's current rules.

Can AltFTool's customs demo tell me how much duty my goods will owe?

No part of AltFTool's BorderLedger customs demo can classify goods or work out duty. Duty depends on the tariff classification, origin and value of the goods and on the rules in force, so confirm it with U.S. Customs and Border Protection or a customs broker before you ship.

What happens to measurements typed into AltFTool's shipping calculators?

Measurements and rates typed into AltFTool's shipping calculators are worked out in your browser and are not stored or sent. Only an email address entered in a sign-up box is saved, by AltFTool, which sends one email to confirm it, and every message has an unsubscribe link.

People also search for

  • freight broker website design
  • courier service landing page
  • 3pl fulfillment website
  • customs broker website
  • parcel shipping website design
  • warehouse storage landing page