Is your building fire-safe and inspection-ready? Connect with licensed pros who keep you compliant.
GuardFlame is an independent information and referral service. We don’t inspect or install fire-protection systems ourselves — we connect businesses with independent, licensed contractors for sprinklers, alarms, extinguishers and code inspections. You compare, and you decide who to hire.
A free, no-obligation assessment of your fire-protection needs
Independent, licensed fire-protection contractors — we connect you, we never inspect or install ourselves
One field on this page: your work email. No system details, no schematics
GuardFlame is an independent referral service, not a fire-protection company. We do not inspect or install systems ourselves. Pricing, cadence and outcomes vary by contractor, building and jurisdiction; compliance and results are not guaranteed.
Inspection-ready, the right way
Licensed, insured, independent contractors
Independent referral service Licensed fire-protection pros We connect · we don't service Email only · no sensitive data Smart-hiring tips shared
Start here
One email connects you to a free assessment and quote
No long forms, no phone screening you didn’t ask for. You give us an email address; we help connect you with an independent, licensed fire-protection contractor for a free assessment and quote.
Independent
Licensed contractors
Email only
No guarantees
Hiring tips shared
FreeNo-cost assessment and written quote from a licensed contractor
9+ servicesSprinklers, alarms, extinguishers, inspections and more
50 statesIndependent, licensed fire-protection contractors across the U.S.
You decideNo obligation — you choose which contractor to hire, always
GuardFlame is an independent information and referral service, not a fire-protection company. Figures describe the service, not any promised result; availability of contractors varies by location, building type and code jurisdiction.
How it works
Four steps from first email to a protected building
Here is exactly what happens after you enter your email — no surprises, no pressure, and no one committing you to anything without your say-so.
Full-building coverage
Protected
Every zone monitored, sprinklered & inspection-ready
01Step one
Tell us about your building
Share one email address and, when you're ready, a few basics — the building type, rough size and what's prompting the call (an inspection, a renovation, a new system). No schematics, nothing sensitive.
02Step two
We match you with licensed contractors
We help connect you with independent, licensed fire-protection contractors who serve your area and building type. GuardFlame doesn't inspect or install anything itself — we make the introductions.
03Step three
Compare scope and quotes
Ask each contractor for an assessment, a written scope and an itemized quote, then compare them like for like. Pricing, cadence and code requirements vary by contractor, building and your AHJ.
04Step four
You choose and schedule
Pick the contractor that fits and hire them directly, on terms you agree to in writing. Any contract, filing and payment is arranged between you and the independent contractor — never through us.
GuardFlame is an independent information and referral service. We do not inspect or install fire-protection systems ourselves — we help connect you with independent, licensed contractors. Any contractor you choose is independently responsible for the services it provides. Pricing and outcomes vary, and compliance is not guaranteed.
What we help with
Every layer of fire protection, one starting point
Whatever your building needs, we aim to connect you with independent contractors that specialize in it. Descriptions below are general information — scope and pricing come from the contractor you choose.
Fire sprinkler systems
Design · install · repair
Wet, dry and pre-action sprinkler systems designed, installed, repaired and tested by licensed contractors for new and existing buildings.
Scope varies by occupancy and code.
Fire alarm & detection
Panels & devices
Addressable and conventional fire alarm panels, smoke and heat detectors, pull stations and notification devices installed and serviced.
Requirements vary by AHJ.
Fire extinguishers
Supply & annual service
Extinguisher supply, mounting, annual service and hydrostatic testing so units are charged, tagged and ready when they're needed.
Service intervals set by NFPA.
Backflow & standpipe testing
Certified testing
Backflow preventer and standpipe inspection and testing to keep your water-based systems reliable and documented.
Cadence varies by jurisdiction.
Emergency & exit lighting
Egress & code
Exit signs and emergency egress lighting installed, tested and maintained so people can leave safely if the power fails.
Testing requirements vary.
Kitchen suppression
Restaurant hoods
Wet-chemical kitchen hood suppression systems for commercial kitchens — installation, inspection and recharge after activation.
Semi-annual service is typical.
Inspections & code compliance
NFPA & your AHJ
Scheduled inspections and testing with the documentation your authority having jurisdiction expects — so you stay inspection-ready.
Providers help you stay compliant.
Alarm monitoring
24/7 reporting
Central-station monitoring and reporting so alarms reach the right responders quickly, day or night.
Monitoring terms vary by provider.
Special-hazard suppression
Clean agent
Clean-agent and special-hazard suppression for server rooms, labs and sensitive areas where water isn't the answer.
Designs vary by hazard.
The services above are general information only. GuardFlame does not inspect, install or service any of these systems itself — we connect you with independent, licensed fire-protection contractors. Pricing, cadence and code requirements vary by contractor, building and jurisdiction, and no specific outcome is guaranteed. Ask any contractor for an assessment and itemized quote in writing before you commit.
When to call a pro
Signs it’s time to bring in a licensed contractor
Fire protection isn’t a set-and-forget system. These are the moments facility and property managers tend to reach out — usually with a deadline attached.
Your inspection is overdue
Tags have expired or you've lost track of when the sprinkler, alarm or extinguishers were last serviced — and the clock is a compliance clock.
You got a fire-marshal notice
A failed inspection, a citation or a correction notice from the fire marshal needs a licensed contractor to make it right.
You're renovating or changing use
A build-out, expansion or change of occupancy can trigger new fire-protection requirements you need designed and permitted correctly.
You're opening a new location
A new space needs systems specified, installed and signed off before you can occupy it — ideally by someone who does this every week.
Whoever you consider, do a little homework first: confirm state licensing and insurance, ask about NICET-certified technicians, and get a written scope. You can also look up a company at the Better Business Bureau (BBB.org).
Why GuardFlame
We connect you. We don’t inspect or install ourselves.
That is the whole model, and we say it plainly. GuardFlame is an independent information and referral service — the licensed contractor you choose does the actual assessment, install and inspection, on terms you agree to directly with them.
We connect — we don't inspect or install
GuardFlame is an independent information and referral service. The assessment, design, install and inspection are handled by the licensed contractor you choose, never by us.
Licensed, insured, independent contractors
We help connect you with independent fire-protection contractors. Each is separately responsible for the systems, testing and documentation it provides to you.
One field: your email, nothing sensitive
The only thing you enter here is an email address. We never ask for schematics, payment details or building-access information on this page.
Honest about compliance — no guarantees
Contractors help you stay compliant with NFPA and your AHJ, but pricing, cadence and outcomes vary. We don't promise a price, a pass or a specific result — you compare and decide.
Composite stories
What staying inspection-ready can feel like
Honest, non-hype accounts of what the referral experience can be like.
We got a correction notice from the fire marshal two weeks before a lease renewal. GuardFlame connected me with two licensed contractors fast — I compared scope in writing and the one I picked had us signed off before the deadline.
TTerrence W. Louisville, Kentucky
Our extinguisher tags were all expired and nobody could tell me when the sprinklers were last tested. What I appreciated was that nobody quoted a magic number over email — I got an itemized assessment and understood exactly what we owed.
BBianca F. Tucson, Arizona
We opened a second restaurant and needed the kitchen hood suppression inspected and the alarm tied into monitoring. The contractor they pointed us to handled the AHJ filing and it felt handled instead of frantic.
MMarco D. Providence, Rhode Island
Composite, illustrative examples, not statements from identified clients; individual results vary. Nothing here predicts or promises a result. Pricing, cadence and outcomes vary by contractor, building and jurisdiction.
Hire smart
Smart-hiring tips before you sign anything
A few minutes of homework protects your budget and your building. These are genuinely useful habits — and a free public resource — that apply no matter who you choose.
How to choose a fire-protection contractor
Whether you work with someone we connect you to or find on your own, run through this short checklist first:
Confirm state licensing & insurance. Fire-protection work is licensed in most states — ask for proof and a current certificate of insurance.
Ask about NICET-certified technicians. NICET certification is a strong signal that the people doing the work know the codes.
Get a written scope & itemized quote. Understand exactly what is inspected, tested or installed — and the cadence — before you sign.
Confirm who files with your AHJ. Know who handles documentation and filings with your authority having jurisdiction. You can also look a company up at the Better Business Bureau (BBB.org).
Straight answers
Questions worth asking first
No. GuardFlame is an independent information and referral service. We do not design, install, inspect or service fire-protection systems ourselves — we help connect you with independent, licensed fire-protection contractors. Any contractor you choose is independently responsible for the services it provides to you.
Last step
Your building, protected.
One email connects you with an independent, licensed fire-protection contractor for a free, no-obligation assessment and quote. No sensitive details on this page — just a first conversation, whenever you’re ready.
An independent referral service — we connect, we don’t inspect or install ourselves
Email only — never payment details, schematics or building-access information
